How to Fix Panasonic Printer Code Errors and Messages

Panasonic printers are reliable, but like any device, they can encounter errors that display specific code errors and messages on the printer’s screen. These codes indicate various issues, from ink cartridge problems to paper jams. This guide, crafted by Ezee Printers, explains common Panasonic printer error codes and provides clear solutions to resolve them. While these steps are designed to be user-friendly, we recommend contacting a professional technician for persistent issues.

Common Panasonic Printer Code Errors and Messages

Panasonic printer error codes vary depending on the issue. Below, we cover some of the most frequent errors, their causes, and how to fix them.

Ink Cartridge Panasonic Printer Errors

Cause: Errors related to ink cartridges often occur due to low ink levels, improper installation, or dried ink on the cartridges.

Solution:

1. Open the printer’s access doors.
2. Remove all ink cartridges from their slots.
3. Inspect each cartridge and wipe any dried ink with a clean, dry towel.
4. Replace any cartridges with low ink levels and reinsert them gently into their respective slots.
5. Ensure the cartridges are securely fixed, then close the printer doors.
6. Check the printer’s display to confirm the error is resolved.

Error Code U7

Cause: Error Code U7 appears when the printer’s feed cover is not properly closed or secured.

Solution:

1. Check the feed cover and ensure it is fully closed.
2. If the error persists, open the feed cover and reinsert it carefully to ensure a proper fit.
3. Verify the printer’s display to confirm the error is cleared.

Error Code E51

Cause: Error Code E51 indicates a paper jam, either in the printer’s rollers or another part of the paper path.

Solution:

1. Turn off the printer and unplug it from the power source.
2. Remove the paper tray and open all access doors.
3. Carefully inspect the paper path and rollers for jammed paper. Remove any paper gently to avoid tearing.
4. Clean the interior of the printer with a dry cloth to remove dust or debris.
5. Use a slightly damp cloth to clean the rollers, then let them dry completely.
6. Close all covers, reconnect the power, and turn on the printer.
7. Print a test page to confirm the error is resolved.

Panasonic Printer Keeps Saying "Replace Toner"

Cause: This error occurs when the toner cartridge is empty, low, or not properly installed.

Solution:

1. Turn off the printer and open the access covers.
2. Remove the toner cartridge and check its toner level.
3. If the cartridge is empty or low, replace it with a new one. If reusable, ensure it’s properly seated in its slot.
4. Securely reinsert the cartridge, close the covers, and turn on the printer.
5. Check the printer’s display to verify the error is cleared.

Example: Fixing Error Code E51 on a Panasonic KX-MB2000 Printer

Scenario: Your Panasonic KX-MB2000 printer displays Error Code E51 due to a paper jam.

1. Turn off and unplug the printer.
2. Open the front and rear access doors and remove the paper tray.
3. Locate a jammed paper in the roller area and gently pull it out in the direction of the paper path.
4. Clean the rollers with a damp cloth and let them dry.
5. Reassemble the printer, plug it in, and print a test page to confirm the error is resolved.

Need Further Assistance?

The above solutions address common Panasonic printer code errors and messages. If you encounter unfamiliar errors or the issues persist, our expert team at Ezee Printers is available 24/7 to provide professional support and diagnostics.